Posted on

Top Woodworking Tips Straight From The Pros

Learning how to become good at woodworking takes time and practice. The following advice is going to help you prepare for taking on this craft. No matter what you’re trying to make with wood, these universal tips are going to get you started. Join in on the fun today, and start seeing what you can create.

Before you get started on any woodworking project, do some research on the type of wood you will be using. Different types of wood absorb paint and stain differently, some too much, and some not enough. If you aren’t certain about what kind of wood you will need, just ask for help.

You can use tape to catch excess glue. If you want to prevent oozing glue stains along joints, try clamping pieces together without using any glue. You just put tape on your joint, and then cut along it using a sharp blade. Separate your pieces, and then apply glue. After that, clamp them to each other again. Your glue will ooze on the tape instead of the wood. You can peel off the tape before your glue dries.

Be certain you know what your budget is able to handle. Sometimes your wallet will restrict what you can actually do. It is easy to get carried away, only thinking of the finished project. Then later realize the project costs too much to finish. Do your homework in advance and select projects that you know you can finish.

When renting tools that you are unfamiliar with, speak with the company about getting a lesson on how to use it. Quite often, they’ve got specialists available that can help you get comfortable with the tool faster than if you learned it on your own. Also ask for any documentation to help you out.

Always wear safety glasses when you are doing anything that involves woodworking. If you do not take the time to put the glasses on you are taking a huge risk that is not sensible. Just think, if you lose your eye sight you will not be able to do woodworking every again.

Buy some scrap wood and use it to practice on. Scrap wood is really cheap, and it makes for great practice wood. Use it to try new skills that you’re learning. Practice with new tools on it. Make your mistakes here, not when it counts. You’ll be happy you did in terms of budget.

Learn about using pilot holes. This is pretty simple to do. When driving a screw or hammering a nail into a little piece of wood or getting pretty close to the edge of a piece, it tends to split. Sometimes it’s unavoidable to put a fixing into a place like this. However, drilling a hole through the joint that’s a bit smaller than the fixing can prevent it from splitting.

If you don’t have the money for a good table saw, buy a quality circular saw. You can accomplish most of the same tasks. Buy a good quality blade. A circular saw is ideal for cutting larger pieces. You will likely find you still use the circular saw often even after you move up to a table saw.

Hold your paintbrush at at 75 degree angle when painting. After you have applied the paint to the woodworking project, use gentle strokes to help eliminate any brush lines. If your paint does develop brush strokes a little sanding can remove them. Simply use a 400 grit sandpaper and gently buff the entire piece.

When using a table saw, use a block of wood clamped to the fence to set your length. Using the fence directly could result in a board being kicked back at you. To make measurements easy, use a block that is exactly 1 inch in length. Then all you have to do is set the fence length 1 inch greater than your desired length.

When caulking using silicone caulk, mist the caulk with a small amount of rubbing alcohol. The alcohol acts as a lubricant allowing your to smoothly run your finger through the caulk for a perfect line of caulk every time. Spraying the surrounding area with alcohol also keeps the caulk from adhering to the surrounding surfaces.

Make your own sanding block that you can use time and time again. You will gain more control when sanding and it is cheaper than buying the manufactured version. Scrap plywood can be turned into a fine holder. Check how many different grits of sandpaper you have, and cut an appropriate piece of wood to spray with your favorite adhesive to use with your sandpaper.

Do you know that different colored tin snips make different kinds of cuts? Tin snips with red handles are used for making left hand turns. Green handled tin snips are used for making right hand turns. Finally, yellow handled tin snips are used for straight lines and gradual curves.

Wear goggles when you are working on your pieces. Wood might fly toward your face at any time, and you want to avoid a trip to the emergency room. You might not think that it is a possibility, but this is one time when it is really important to be cautious.

There are some tools that you must have on hand. A necessary tool for any woodworker is a hammer. A claw hammer is the best for woodworking. Get one with the proper heft for your hand. You certainly don’t want a tool that’s too heavy to lift.

Never rush through your woodworking sessions. Not only can you make mistakes in your project, you can also severely hurt yourself in the process. Take things slow, and double check your work often. Even if this means the project takes a few extra hours, your safety is worth more than that extra time.

Check your wood stains on spots that you can’t or can barely see. The stain might come out blotchy or off color. Testing it will allow you to change things. This could mean a lot less hassle in the future.

All great masters of their trade take the time to educate themselves on as much as possible in regards to their skills and techniques. You will be a better woodworker now that you have taken the time to learn from this article. Continue your reading so that you can produce amazing results.